Industrial water treatment, from analysis to commissioning under one roof

The right system starts with an analysis of the raw water: hardness, conductivity (TDS), turbidity, iron and manganese, and microbiological values determine which treatment stages are needed. The second criterion is the required flow rate (m³/h) and daily consumption, and the third is the intended use of the water (boiler feed water, process water, drinking water, washing).

At Today Arıtım, we first analyse the water in our own laboratory, then design the filtration, softening, reverse osmosis or ultrafiltration stages according to the capacity of your business.

Ultrafiltration uses a membrane with 0.01 micron pores to retain suspended solids, turbidity, bacteria and viruses; dissolved salts pass through. It is used for pretreatment and disinfection.

Reverse osmosis, on the other hand, separates 90-99% of dissolved salts and ions with a semi-permeable membrane; it is preferred in boiler, process, pharmaceutical and food applications that require near-pure water. In most industrial plants, UF works together with RO as its pretreatment stage.

A softening system prevents the formation of limescale (permanent hardness) by exchanging the calcium and magnesium ions in the water for sodium through ion exchange. It is needed in every facility where heat is transferred, above all boilers and steam generators, cooling towers, industrial dishwashers and washing machines, textile dyehouses, hotels and canteens, to prevent efficiency losses and breakdowns caused by limescale.

The process has four steps: site survey and water analysis → design and quotation → manufacturing and installation → commissioning and training. Installation time varies with the capacity of the system; we share a clear schedule after the site survey.

With our head office in Avcılar, Istanbul and our production plant in Çorlu, Tekirdağ, we provide on-site service across the Marmara Region and project-based service throughout Turkey.

Filter cartridges and sand/carbon media, softener salt, RO membranes and UV lamps are checked and replaced at regular intervals. The maintenance frequency depends on raw water quality and operating hours; typically, a monthly check and a comprehensive service every 6-12 months are planned.

With a periodic maintenance contract, our technical service team keeps your systems running at day-one efficiency and responds as quickly as possible in the event of a fault. Original spare parts are supplied from our stock.

Yes. In our own water quality and analysis laboratory, we measure the hardness, conductivity, pH, iron, chlorine and microbiological values of the sample taken from your facility and report the results. The analysis report is used to determine which treatment stages are needed and how the system should be sized. To request an analysis, simply fill in the contact form or give us a call.

For a fast and accurate quote, the following is enough: the water source (mains, well, surface water), the required flow rate or daily consumption, the intended use of the water, any existing water analysis and the location of the facility. With this information, we prepare a preliminary quote within 1-2 working days and plan an on-site survey if needed.